PDA

View Full Version : oil consumption related to broke timing belt and new valves



dmose10
01-11-2012, 09:43 PM
2006 subaru impreza 2.5

In july my timing belt broke driving on the hwy going 75 mph and bent the valves. i had the yiming belt and all the valves replaced and ever since my car is going through about a quart a week. The mechanic told me that te oil consumption should have nothing to do with the valves and could be only one of two things, the pcv valve or the rings. I am suspicious of a shotty job considering he did the job for considerably less then everyone else i got a quote from and i am wandering that if any corners were cut in the valve job could cause oil to burn.

dmose10
01-11-2012, 09:58 PM
If he cut corners by not doing new guides or seals would that cause oil consumption?

dmose10
01-11-2012, 10:01 PM
Is it possible that when the timing belt broke and the piston impacted the valve that the valve damaged one of the rings?

michaelrepair
02-06-2012, 10:36 PM
just do a cylinder leak down test that will answer your question