PDA

View Full Version : 2.5 Blown Engine



00_Coupe
10-24-2010, 10:53 PM
Hello Guys,

I bought a 04 2.5rs with a blown engine. Looks like it has a spun rod bearing and its leaking coolant. I found a replacement engine for a good price with very low km. Would you guys have some tutorials? I have done swaps in the past so I don't think it will be an issue, but never worked on subaru's before...

oxen
01-06-2011, 09:28 PM
the engine is easy to pull.

the wire harness isnt a big deal either.

un bolt the power steering and the ac compressor and pull it out.

if its a 5 speed take a look at the clutch would be worth it to replace while the engine is out if its worn.

also check the valve cover gaskets and rear main seal before you install the new motor. and save some time on some oil leaks.