PDA

View Full Version : 98 WRX sti ABS light on



dodgescooby
11-27-2009, 03:16 PM
98 WRX sti ABS light on .checked all wheel sensors reading okay ,anybody know anything about the G sensor tied in with the ABS system ,i have a manual that says the sensor should read between 42 and 59 k ohms mine is reading 9.1 k ohms can anybody else check this ,its located under cover of the handbrake. thanks

ericams
12-04-2009, 02:52 AM
I have been searching and no luck, does the car throw any codes? I did find where if you had an ABS diagnosis connector you could read the EEP ROM of the last 3 problems.

I do know that everything seems to point at the • ABS Control Module and Hydraulic Control Unit (ABSCM&H/U)

let me know if you read any other codes so I can look those up

thanks

dodgescooby
12-08-2009, 02:26 PM
Thanks for that man >Im in REP of IRELAND and my car a jap import therefore i cant get the correct lead to plug in and check for codes. No problem getting lead to plug into engin ,abs different story.


cheers.

kloforest
12-10-2009, 07:33 AM
Remember, this could become complicated. Not just the sensor could be a problem, maybe the system has something damaged